RAMCO COMPUTER SUPPLIES

209 East Court St.

Kankakee, IL 60901

Phone (815) 937-0571 * Fax (815) 937-0595

E mail:  ramco@ramcoweb.com * Web Page:  www.ramcoweb.com

 

THERMAL HEAT TRANSFER PAPER

YELLOW LINE

 

1. HOW TO FEED TRANSFER PAPER
• Print onto BLANK surface
• If lead edge is curled, straighten before feeding

 

2. ITEMS YOU CAN TRANSFER ONTO
• White or light colored fabrics consisting of 100% cotton or cotton/polyblends:e.g. Beach/Nite/baseball/T-Shirts, Pillowcases, Aprons, Etc.

 

3. HOW TO TRANSFER USING COMMERCIAL HEAT PRESS
• Cut away blank, unprinted area of transfer
• Place garment onto press pad
• Place transfer ( color side DOWN ) onto garment
• Press at 325 degrees for 15 seconds, with high pressure
• REMOVE WHILE HOT!!

 

4. HOW TO WASH
• Turn garment inside out
• DO NOT use bleach
• Wash in cool-warm water only
• Dry at cool setting
• DO NOT iron garment

 

FOR BANNERS

 

1.      Fold one corner of the transfer underneath to provide grip for peeling.

2.      Place transfer onto banner.

3.      Press transfer for 15 seconds at 325 degrees.

4.      Peel transfer immediately from banner while HOT, beginning at the corner of the flap and applying firm, steady pressure.

5.      After transfer has been peeled off, place apiece of any plain white paper over the image on the banner and re-press for 2 seconds.

Peel immediately while HOT, and you will have a smooth, soft surface.

 

The seller and manufacturer’s maximum obligation shall be to replace any paper, which has proven to be defective.  Neither the seller nor the manufacturer shall be liable for any injury, direct or consequential, arising out of the use of, or inability to use this paper.                             

 

STORE IN A COOL, DRY AREA

 

Note: New “Yellow Line” Paper has a slight  “curling “ problem.  After package has been opened please place unused portion, lined side up, onto a flat surface.  Light weight on top will help.  Lab tests show this start-up problem has been solved.